Blender blades are vital and important parts for blending and saucing food ingredients. Without blades, it’s impossible to cut or process the solid ingredients into liquid or pudding form.
The blades are used for preparing sauce, milkshakes, fruit juice, etc.
They are made to be inserted into a mini chopper or blender. Blender blades have different varieties of uses but it’s mostly used in preparing drinks, pudding, and soup.
So, do Blender Blades get dull?
Yes! Blender blades get dull as time goes on while using the blender and it has its reasons. Though blender blades vary, some take time to get dull while others get dull easily.
The way we handle the Blades can determine how long it’s last before it gets dull.
The reason blender blades get dull is due to the blending of hard ingredients with little or no water.
Cleaning material also dulls the Blades.
Using cleaning agents that aren’t proper can also dull blades.
Improper use of blades can aid quick dulling of the blades.
Table of Contents
What To Do When Blender Blades Get Dull
Blender Blades getting dull is inevitable and it has its solution. It is easy to know when your blades are getting dull, it doesn’t function as before.
When you notice your blades are getting or already dull, the only and easiest solution is to replace them or sharpen them.
When you want to sharpen the Blades it is advisable to unplug the blender and loosen
Or disassemble its parts, clean the blender to ensure a beat work is done,
Remove the screw from its position by unscrewing them from the chopper,
Separate the Blades from the base, clean the blade again,
Sharpen the Blades with a sharpening stone or any other sharpening agent.
When you’re done with sharpening it, couple the blender and test the results.
- How to tell if plastic is dishwasher safe?
- How to Julienne Carrots with a Grater
- Are Pyrex measuring cups oven safe?
- Can dunkin’ donuts go bad in the fridge, freezer, and at room temperature?
How Often Do You Need To Replace A Blender Blades?
Blender Blades are supposed to have the same shelf life as the blender itself, but due to the hard agent of its blades, it tends to last shorter.
Blades don’t have a specific time to be replaced, but there are some changes you’ll notice that call for replacement.
If you notice there’s any scratch its dent on the blades, it is time for a replacement.
If the blades don’t blend regular and easy ingredients it also calls for replacement.
Some research had shown it can still be replaced or changed after every three months,
But it’s not compulsory when the blades are still doing fine.
How To Sharpen Blender Blades Without A Stone?
Sharpening of blades with stone is not the only option to sharpen blades.
They’re still other many ways to sharpen blades.
You can use eggshells and water to sharpen the blade, this method is very popular
Though some people are scared of using it for fear that it might damage their Blades.
Raw salt can be used to sharpen the blades also, the salt that’s to be used shouldn’t be table salt
Or sea salt but should be blended with raw coarse salt, ice is a popular way of sharpening the blade
And it’s not very effective it can dull the blades quickly aluminum foil is also a good option.
How To Sharpen Blender Blades With Ice?
Though sharpening blades with ice is very popular it’s still not effective because it can cause the blades to dull quickly.
But if you have a strong blade with high power it can resist the side effect of the ice.
When using ice to sharpen the blade cut the ice into small cubes and portions, clean the complete blender,
Put the ice cube into the blender, and blend till it completely changes to a liquid.
Do Egg Shell Sharpen Blender Blades?
Yes! Eggshells and water are very popular ways to sharpen Blades.
When using an eggshell to sharpen the blade, put a hand full of eggshell into the blender,
Add water that’ll cover the eggshell then turn on the blender, and blend it till it is pulverized.
When you’re done with it do not throw it or drain the remaining shell on the sink
This is because it might block the pipe, instead throw it in the trash or make good use of them.
10 Best Ways To Sharpen Blender Blades
Here are the best ways to sharpen a blender;
1. Ice method:
Wash the blender clean and thoroughly, cut the ice into smaller cubes, put it in the blender, and blend till it’s smooth.
Remember ice method is not the best sharpening method because it can make the blade dull easily.
2. Eggshell and water method:
Eggshell is another method of sharpening the blade.
Place the shells inside the blender add an adequate amount of water that will cover the shells and blend for some time.
After blending do not drain it in the sink so that it won’t block the pipe.
Instead, throw it in the trash.
3. Aluminum foil method:
This is an option or alternative for sharpening blender Blades
It’s not very effective, It only improves the appearance of the blades.
This is done by tearing aluminum foil about 10mm long and folding it into many layers of about 8,
Then use the blade to cut the foil into about 10 strips.
Test the blender if there’s any improvement in the sharpness. Clean off tiny pieces of foil after use.
4. Rice method:
Though this is not popular it’s also effective.
After cleaning the blender put a handful of rice in the blender with some amount of water
And blend till it’s soft enough. When you’re done ensure to Rinse the blender of all the remnants.
5. Stone method:
As usual, wash the blender and disassemble it, use the stone to run through the blade for some minutes, when coupling it back.
- How long does Heinz gravy last in the fridge, freezer, and at room temperature?
- Does coffee creamer go bad in the storage place?
- How to flip a pancake without a spatula?
- How to clean burnt greenpan?
- Are rubber spatulas dishwasher safe?
6. Diamond sharpening stone:
The diamond sharpening stone is a type of blade sharpener, This type of sharpener is not common in our local society today.
Unplug the blender from the socket to avoid electrocution.
Remove all the parts of the blender, take out the blade, and file it with the sharpening stone until it’s sharp enough.
Remember to be careful when handling the blade in order not to hurt yourself.
Clean up after you’re done.
Sandpaper is not a common option for sharpening blades but it’s very effective.
This has strong and stiff edges that can sharpen metal.
Disassemble the blender and take off the blade, use the sandpaper to scrub the edges of the blade to sharpen it.
Clean the blender and the blade after use.
This is also an alternative for sharpening blades.
Pour a handful of and in the blender, add just a little amount of water to their sand
And turn on the blender, and let it in the blender for just a short amount of time so that the blender won’t get spoilt.
9. Knife sharpeners:
As the name implies this is used to sharpen a knife but can be also used to sharpen Blades because it has the same metal edge as the knife.
Before using the Sharpener dissemble the parts of the blender then use the Sharpener to file the edges of the blade.
Grain is so not popular when it comes to sharpening blades, it’s not used by most people.
When using grain to sharpen the blade remember to wash the blender first
Then pour a handful of grain into the blender and blend it till it’s moist.
Take note to clean the blender after use.
How To Sharpen Ninja Blender Blades?
Though ninja Blades are convenient it tends to get duller quickly than regular Blades.
It consists of four regular blends having two pointing upwards while the other two are pointing downward.
In sharpening the ninja blade first of all ensure that the blender is unplugged to avoid it sticking you,
Remove the blender jug and separate the glass from the bottom,
And remove the blade by twisting it counter clockwise to divide.
Remember to be extra careful and not force it because it’s made of glass and can easily break,
Wash the blade with clean water getting rid of stuck food in he blender,
Then run the Blades edges on a sharpening agent thereby maintaining the angle it’s shaped on,
When you’re done reassemble the blender.
How To Sharpen Vitamin Blender Blades?
Protecting your hands while sharpening the blades is advisable so put on a rubber glove,
- Hold tightly one hand the sharpening stone, and run them over the blade,
- Keep the blade at a 15degree angle woke to sharpen it under running water
- Clean off all residue after sharpening so that they won’t be built-up dust in the stone,
- Put the blade into the blender and tighten it.
What Can Cause A Blade To Dull
Blades can get dull due to many reasons.
Blending strong stuff with little to no water with the blender can make it dull.
Improper use of the blades can make it get dull easily, and handling the blender carelessly can make it get dull.
Harsh cleaning agents also make the blade get dull easily.
How To Maintain A Blender Blade
Here’s how to maintain a blender blade;
- Clean the blade after each use: After blending it is important to cleanse the blade with soapy water so that they won’t be any left particles or debris on The blade.
- Regularly Sharpen the blade when you notice any sign of dullness in it. If there’s any need for repairs do that immediately.
- Does Mott’s applesauce go bad in the fridge, freezer, and at room temperature?
- Best scrubber for stainless steel Pans
- What can I use instead of a whisk?
- How to use pampered chef can openers?
- How long does Nutribullet last?
They’re different ways to maintain and Sharpen Blender Blades with include icing, stone method, rice method, etc.
It’s important to handle the blender with care to avoid quick dulling of the blades.